Veritas

Exceptionally high clamping forces can be obtained with this hold down, as the arm is free to pivot independently. All levered forces are exerted downward, without any loss due to horizontal slippage...

Veritas Bevel Up Smoothing Plane with PMV-11 Blade is used for the final finish, especially woods with difficult grain, and combines the width and weight of a smoother with the versatility of a low...

The Veritas Bevel-Up Jointer Plane is the largest bevel-up bench plane; ideal for jointing edges and flattening large panels. The bevel-up blade configuration results in a plane that is...

Either of the 1/2" blades can be attached to this jig. The jig turns the task of sharpening of these blades into a much more normal procedure.

Veritas Plane Sacks are high quality and made from a silicone-treated knitted cotton that protects your plane and resists moisture and helps deter rust forming. Designed much like a tube sock with a...

The Veritas Box-Makers Plough Plane is a specialised small joinery plane, ideal for cutting grooves, such as those used for small drawers and box bottoms. It also has the ability to cut rebates...

Veritas Camber Roller Assembly M0905 is an attachment specifically designed for use with the Veritas Mk II Honing Guide.  Use it to hone a slight curve, or camber, into the edge of the blade when...

The Veritas Crosscut Carcass Saw has great balance, cuts easily, stays true and has a comfortable and secure grip.  The saw measures 275mm (11") long by 0.5mm thick high-carbon steel blade filed for...

The Veritas Crosscut Dovetail Saw has great balance it cuts easily, stays true and the pistol grip helps make the saw feel like an extension of your arm. The saw has a 235mm (9.1/4") long by 0.5mm...

Traditionally used for the trimming of plugs and dowels flush with a surface, this flush cutting saw can be used where you want to cut off a projection without damaging the surrounding or adjoining...

Traditionally used for the trimming of plugs and dowels flush with a surface, this flush cutting saw can be used where you want to cut off a projection without damaging the surrounding or adjoining...

The best tool available for quick and accurate marking of dovetails. Supplied as a pair, a 1:6 for softwoods and a 1:8 for hardwoods. Both are 50mm(2") x 50mm(2") and made from anodised aluminium...

The Veritas Dovetail Saddle Marker 1:8 is precisely machined tool with the traditional 1:8 angle.  Designed with long legs to ensure accurate registration on the workpiece.  The saddle enables you...

Veritas Dual Marking Gauge features two independently adjustable rods, which mean this gauge can scribe both sides of a mortice at once. The length of each ground stainless-steel rod is very...

Replacement Inside cutter wheel for the Veritas Dual Marking Gauge.